1、 Common faults and causes of vibrating screen material machine

1, Screen blockage: Screen blockage is one of the common faults, mainly caused by excessive impurities or high humidity in the material, leading to screen blockage.

2, Insufficient vibration force: Insufficient vibration force of the vibrating screen material machine is another common fault, mainly caused by damage to the vibration motor or improper installation of the vibration motor.

3, Screen machine noise: It is also a common fault for vibrating screen machines to produce noise during operation, mainly due to bearing wear or lack of lubrication.

​

2、 Troubleshooting of vibrating screen material machine

1, Screen blockage: Clean the screen in a timely manner using a shovel or specialized brush. If the blockage is severe, the sieve can be removed for cleaning.

2, Insufficient vibration force: Check if the vibration motor is damaged or improperly installed, and replace or reinstall the motor.

3, Screen machine noise: Check whether the bearings are worn or not lubricated, and replace the bearings or add lubricating oil to them.

3、 Daily maintenance of vibrating screen material machine

1, Regularly clean the sieve: Regularly clean the sieve to prevent it from clogging.

2, Regularly check the vibration motor: Regularly check whether the vibration motor is running normally to avoid insufficient vibration force.

3, Regularly add lubricating oil: Regularly add lubricating oil to maintain the lubrication status of the bearings and avoid the occurrence of noise from the vibrating screen material machine.

This article introduces the common faults and corresponding solutions of vibrating screen material machines, as well as the precautions for daily maintenance. As long as you master these methods, you can easily deal with fault problems and ensure the normal operation of the vibrating screen material machine.